ПРОКЛАДКА ГОЛОВКИ БЛОКА ЦИЛИНДРОВ УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *1 | CYLINDER HEAD GASKET | *2 | CYLINDER HEAD SUB-ASSEMBLY |
| *3 | EXHAUST FUEL ADDITION INJECTOR ASSEMBLY | *4 | FUEL INJECTOR SEAL |
| *5 | GLOW PLUG ASSEMBLY | *6 | NO. 1 GLOW PLUG CONNECTOR |
| *7 | GLOW PLUG SCREW GROMMET | *8 | WASHER |
| *9 | NO. 1 NOZZLE HOLDER CLAMP | *10 | GASKET |
| *11 | PLATE WASHER | *12 | CYLINDER HEAD SET BOLT |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| *T1 | for New Bolt: 1st: 50 (510, 37) 2nd: Turn 90° 3rd: Turn 90° 4th: Turn 90° 5th: Loosen 90° 6th: Loosen 90° 7th: Turn 90° 8th: Turn 90° 9th: Turn 90° for Used Bolt: 1st: 50 (510, 37) 2nd: Turn 90° 3rd: Turn 90° 4th: Turn 90° |
- | - |