Click here

МАСЛЯНЫЙ РАДИАТОР ДВИГАТЕЛЯ СНЯТИЕ

Click here
Click here

CAUTION / NOTICE / HINT

Note:

  • When replacing the injectors (including shuffling the injectors between the cylinders), common rail, intake manifold or cylinder head, it is necessary to replace the injection pipes with new ones.

  • When replacing the fuel supply pump, common rail, intake manifold or cylinder head, it is necessary to replace the fuel inlet pipe with a new one.

Click here

PROCEDURE


  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. Click here

    REMOVE DIESEL THROTTLE BODY ASSEMBLY

    Click here

  4. Click here

    DRAIN ENGINE OIL

    Click here

  5. Click here

    DISCONNECT ENGINE WIRE

    Click here

  6. Click here

    REMOVE EGR VALVE BRACKET

    Click here

  7. Click here

    REMOVE NO. 7 WATER BY-PASS HOSE

    Click here

  8. Click here

    DISCONNECT NO. 8 WATER BY-PASS HOSE

    Click here

  9. Click here

    REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

    Click here

  10. Click here

    REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

    Click here

  11. Click here

    REMOVE FUEL INLET PIPE SUB-ASSEMBLY

    Click here

  12. Click here

    REMOVE INJECTION PIPE SUB-ASSEMBLY

    Click here

  13. Click here

    REMOVE COMMON RAIL ASSEMBLY

    Click here

  14. Click here

    REMOVE INTAKE MANIFOLD INSULATOR

    Click here

  15. Click here

    REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  16. Click here

    REMOVE DIESEL TURBO PRESSURE SENSOR

    Click here

  17. Click here

    REMOVE NO. 1 GAS FILTER

    Click here

  18. Click here

    REMOVE GAS FILTER BRACKET

    Click here

  19. Click here

    REMOVE ENGINE COVER BRACKET

    Click here

  20. Click here

    REMOVE NO. 2 INTAKE MANIFOLD

    Click here

  21. Click here

    DISCONNECT NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

    Click here

  22. Click here

    REMOVE INTAKE MANIFOLD

    Click here

  23. Click here

    REMOVE WATER BY-PASS HOSE


    1. B002ADR

      Slide the 2 clamps and remove the water by-pass hose from the oil cooler assembly and water outlet.

  24. Click here

    REMOVE OIL COOLER ASSEMBLY


    1. B002AK8

      Remove the 5 bolts and oil cooler assembly.

    2. Remove the 3 gaskets from the No. 1 oil cooler bracket.