ТЕРМОСТАТ УСТАНОВКА

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A01QU0PC02
      *1 Jiggle Valve

      Install the thermostat to the water inlet.

      Note

      The jiggle valve must be set within 10° on either side of the position shown in the illustration.

  2. CONNECT WATER INLET


    1. Connect the water inlet with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL GENERATOR ASSEMBLY

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here

  6. INSTALL NO. 1 ENGINE UNDER COVER

    Click here