Click here

ТЕРМОСТАТ УСТАНОВКА

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A01GD7TC01
      *1 Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tip:

      The jiggle valve may be set to within 10° on either side of the prescribed position.

  2. Click here

    INSTALL WATER INLET


    1. Install the water inlet with the 3 bolts.

      11 N*m 112 kgf*cm 8 ft.*lbf
  3. Click here

    INSTALL NO. 4 WATER BY-PASS PIPE


    1. A01GDI3

      Apply soapy water to a new O-ring and install it to the No. 4 water by-pass pipe.

    2. Install the No. 4 water by-pass pipe with the bolt.

      11 N*m 112 kgf*cm 8 ft.*lbf
  4. Click here

    CONNECT NO. 2 RADIATOR HOSE

    Click here

  5. Click here

    INSTALL NO. 2 WATER BY-PASS HOSE


    1. A01GC13C01
      *a Top
      *b RH Side
      *c Rear Side

      Install the No. 2 water by-pass hose to the No. 4 water by-pass pipe and radiator reservoir assembly, slide the 2 clamps to secure it.

      Tip:

      The direction of the hose clamp is indicated in the illustration.

  6. Click here

    ADD ENGINE COOLANT

    Click here

  7. Click here

    INSPECT FOR COOLANT LEAK

    Click here

  8. Click here

    INSTALL NO. 1 ENGINE UNDER COVER

    Click here