ДАТЧИК ТЕМПЕРАТУРЫ МОТОРНОГО МАСЛА СНЯТИЕ

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  2. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. Disconnect the engine oil temperature sensor connector.

    2. A01KBYWC01
      *a 19 mm Deep Socket Wrench

      Using a 19 mm deep socket wrench, remove the engine oil temperature sensor from the timing chain cover sub-assembly.

      Note

      If an engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.