ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА

PROCEDURE

1. INSTALL INTAKE AIR TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the intake air temperature sensor.

   2. Using a 22 mm ball joint lock nut wrench, install the intake air temperature sensor.

      Torque:

      34.3 N*m  { 350 kgf*cm, 25 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench.

      Click here

   3. Connect the intake air temperature sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER

   Click here