ПЕРЕКЛЮЧАТЕЛЬ ПРИНУДИТЕЛЬНОГО ПЕРЕХОДА НА ПОНИЖЕННУЮ ПЕРЕДАЧУ СНЯТИЕ

PROCEDURE


  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for LHD)

    Click here

  2. REMOVE FRONT NO. 1 CONSOLE BOX INSERT (for LHD)

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Click here

  4. REMOVE FRONT DOOR OPENING TRIM COVER RH (for RHD)

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  6. REMOVE ACCELERATOR PEDAL ASSEMBLY

    Click here

  7. REMOVE KICK DOWN SWITCH ASSEMBLY (for LHD)


    1. A01MWWC

      Disconnect the clip from the body.

    2. A01MWVF

      Turn back the floor carpet.

    3. A01MYV6

      Disconnect the kick down switch assembly connector.

    4. Disconnect the clamp from the kick down switch assembly.

    5. A01MWX6

      Remove the nut, 2 bolts and kick down switch assembly from the body.

  8. REMOVE KICK DOWN SWITCH ASSEMBLY (for RHD)


    1. A01MVKA

      Disconnect the clip from the body.

    2. A01MWIB

      Turn back the floor carpet.

    3. A01MXAL

      Disconnect the kick down switch assembly connector.

    4. A01MY28

      Remove the 2 nuts, bolt and kick down switch assembly from the body.