ДЕМПФЕР ПУЛЬСАЦИЙ ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ СНЯТИЕ

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  3. PRECAUTION

    Note

    After turning the engine switch off, waiting time maybe required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. DISCONNECT NO. 2 VENTILATION HOSE

    Click here

  6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  7. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. A01MWWOC03
      *1 Fuel Tube Sub-assembly

      Remove the fuel pressure pulsation damper assembly and 2 gaskets, and disconnect the fuel tube sub-assembly from the fuel pump assembly.