РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ УСТАНОВКА

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. Apply a light coat of gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

   2. Install the fuel pressure regulator assembly to the fuel filter.

      Note

      Make sure that the O-ring is not cut or pinched during installation.

   3. Engage the 2 claws and install the No. 2 fuel suction support to the fuel filter.

      Note

      
      

      • If the fuel main valve assembly and fuel pressure regulator assembly are mistakenly interchanged when they are installed, the engine may stall. Always make sure the installation positions are correct.

      • When installing the O-rings, make sure they do not become pinched or cut.

      • Securely engage the claws.

2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY

   Click here

3. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here