ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE


    1. A01MYJ3N02

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01MU41

      Remove the 8 bolts, front drive plate spacer, drive plate and the rear drive plate spacer.

  3. REMOVE ENGINE REAR OIL SEAL


    1. A01MXX3C03
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut through the engine rear oil seal lip.

    2. Using a screwdriver, pry out the engine rear oil seal.

      Note

      After the removal, check the crankshaft for damage.

      If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.