РАДИАТОР СНЯТИЕ

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  4. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  5. REMOVE ENGINE UNDER COVER

  6. DRAIN ENGINE COOLANT

    Click here

  7. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  8. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A01MXHWC01
      *A for RHD
      *B for LHD

      Disengage the 2 clamps and disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

  9. REMOVE HOOD LOCK ASSEMBLY

    Click here

  10. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    1. A01MY8Y

      Slide the clip and disconnect the radiator reserve tank hose from the water inlet.

    2. Disconnect the clamp and wire harness from the radiator reserve tank assembly.

    3. Disengage the 2 claws and remove the radiator reserve tank assembly from the fan shroud assembly.

  11. REMOVE NO. 1 RADIATOR HOSE


    1. A01MX1U

      Slide the 2 clips and remove the No. 1 radiator hose from the radiator assembly and water inlet.

  12. DISCONNECT NO. 2 RADIATOR HOSE


    1. A01MWYC

      Disengage the clamp and disconnect the No. 2 radiator hose from the radiator hose clamp.

    2. Remove the radiator hose clamp from the fan shroud assembly.

    3. A01MXG7

      Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.

  13. DISCONNECT ENGINE ROOM MAIN WIRE


    1. A01MWVO

      Disconnect the cooling fan ECU connector.

    2. Disengage the 7 clamps and disconnect the engine room main wire from the upper radiator support sub-assembly.

  14. REMOVE RADIATOR SUPPORT SUB-ASSEMBLY UPPER

    A01MY69

    1. Disconnect the 2 horn connectors.

    2. A01MYQG

      Disengage the 6 clamps and disconnect the wire harness from the upper radiator support sub-assembly.

    3. A01MWKV

      Remove the 5 bolts and upper radiator support sub-assembly.

  15. SEPARATE COOLER CONDENSER ASSEMBLY


    1. A01MXMV

      Disengage the 2 claws.

    2. Disengage the 2 guides and separate the condenser assembly from the radiator assembly.

      Note

      Do not damage the condenser assembly or radiator assembly when removing the condenser assembly.

  16. REMOVE ENGINE ROOM ECU OUTLET DUCT

    A01MVZW

    1. Remove the engine room ECU outlet duct from the fan shroud assembly.

  17. REMOVE RADIATOR ASSEMBLY


    1. Remove the radiator assembly with the fan shroud assembly from the vehicle.

      Note

      Do not apply excessive force to the condenser assembly or pipe when removing the radiator assembly.

    2. A01MY2G

      Disengage the 3 claws.

    3. Disengage the 3 guides and remove the fan shroud assembly from the radiator assembly.

      Note

      Do not damage the radiator assembly when removing the fan shroud assembly.

  18. REMOVE RADIATOR SUPPORT CUSHION


    1. Remove the 2 radiator support cushions from the radiator assembly.

  19. REMOVE LOWER RADIATOR SUPPORT


    1. Remove the 2 lower radiator supports from the radiator assembly.