ЭЛЕКТРОДВИГАТЕЛЬ ВЕНТИЛЯТОРА СИСТЕМЫ ОХЛАЖДЕНИЯ УСТАНОВКА

PROCEDURE

1. INSTALL NO. 2 COOLING FAN MOTOR

   
   

   1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

2. INSTALL COOLING FAN MOTOR

   
   

   1. Install the cooling fan motor with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

3. INSTALL NO. 2 FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the No. 2 fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL COOLING FAN ECU

   
   

   1. Install the cooling fan ECU with the 2 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

   2. Connect the 4 clamps and wire harness.

   3. Connect the cooling fan motor connector and No. 2 cooling fan motor connector.

6. INSTALL FAN SHROUD ASSEMBLY

   
   

   1. Engage the 3 guides.

   2. Engage the 3 claws and install the fan shroud assembly to the radiator assembly.

      Note

      Do not damage the radiator assembly when installing the fan shroud assembly.

7. INSTALL ENGINE ROOM ECU OUTLET DUCT

   Click here

8. CONNECT ENGINE ROOM MAIN WIRE

   Click here

9. INSTALL RADIATOR RESERVE TANK ASSEMBLY

   Click here

10. CONNECT NO. 2 RADIATOR HOSE

    Click here

11. INSTALL NO. 1 RADIATOR HOSE

    Click here

12. INSTALL INLET NO. 1 AIR CLEANER

    Click here

13. ADD ENGINE COOLANT

    Click here

14. INSPECT FOR COOLANT LEAK

    Click here

15. INSTALL ENGINE UNDER COVER

16. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

17. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here