НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ СНЯТИЕ

PROCEDURE


  1. REMOVE COMPRESSOR AND MAGNETIC CLUTCH

    Click here

  2. DRAIN ENGINE COOLANT

    Click here

  3. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    Click here

  4. REMOVE NO. 1 RADIATOR HOSE

    Click here

  5. DISCONNECT NO. 2 RADIATOR HOSE

    Click here

  6. REMOVE NO. 1 ENGINE COVER

    Click here

  7. REMOVE INJECTOR DRIVER

    Click here

  8. REMOVE NO. 2 ENGINE COVER

    Click here

  9. REMOVE WATER PUMP PULLEY


    1. A01MYYRN01

      Using SST, hold the water pump pulley.

      SST
      09960-10010   ( 09962-01000, 09963-00700 )

    2. Remove the 4 bolts and water pump pulley.

  10. REMOVE WATER INLET


    1. A01MW7EC02
      *1 No. 2 Water By-pass Hose
      *2 No. 3 Water By-pass Hose
      *3 No. 4 Water By-pass Hose
      *4 No. 6 Water By-pass Hose
      *5 Radiator Reserve Tank Hose

      Slide the clip and disconnect the No. 2 water by-pass hose from the water inlet.

    2. Slide the clip and disconnect the No. 3 water by-pass hose from the water inlet.

    3. Slide the clip and disconnect the No. 4 water by-pass hose from the water inlet.

    4. Slide the clip and disconnect the No. 6 water by-pass hose from the water inlet.

    5. Slide the clip and disconnect the radiator reserve tank hose from the water inlet.

    6. A01MZ9XC03
      A01MWAN Bolt
      A01MVAU Nut

      Remove the 4 bolts, nut and water inlet.

    7. A01MYAMC02
      *1 No. 1 Water Inlet Housing Gasket
      *2 Water Outlet Pipe O-ring

      Remove the No. 1 water inlet housing gasket and water outlet pipe O-ring.

  11. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


    1. A01MUH8

      Remove the bolt, No. 2 idler pulley cover plate and No. 2 idler pulley sub-assembly.

  12. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. A01MU3O

      Remove the 16 bolts, engine water pump assembly and water pump gasket.