BACK DOOR OUTSIDE GARNISH(for Lower Side) REASSEMBLY

PROCEDURE


  1. INSTALL UPPER BACK DOOR GARNISH MOULDING PROTECTOR

    Tech Tips

    When installing the upper back door garnish moulding protector, heat the lower back door outside garnish sub-assembly using a heat light.

    Standard
    Item Temperature
    Lower Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the lower back door outside garnish sub-assembly excessively.


    1. Clean the lower back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the lower back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the lower back door outside garnish sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install the upper back door garnish moulding protector as shown in the illustration.


      1. Using a heat light, heat the lower back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the upper back door garnish moulding protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the upper back door garnish moulding protector with the mark-off line of the lower back door outside garnish sub-assembly, and then install it.

        Tech Tips

        Press the upper back door garnish moulding protector firmly to install it.

        A01QSQHC01
        *a Mark-off Line - -

  2. INSTALL LOWER BACK DOOR GARNISH MOULDING PROTECTOR

    Tech Tips

    When installing the lower back door garnish moulding protector, heat the lower back door outside garnish sub-assembly using a heat light.

    Standard
    Item Temperature
    Lower Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the lower back door outside garnish sub-assembly excessively.


    1. Clean the lower back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the lower back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the lower back door outside garnish sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install the lower back door garnish moulding protector as shown in the illustration.


      1. Using a heat light, heat the lower back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the lower back door garnish moulding protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the lower back door garnish moulding protector with the mark-off line of the lower back door outside garnish sub-assembly, and then install it.

        Tech Tips

        Press the lower back door garnish protector firmly to install it.

        A01QTDDC01
        *a Mark-off Line - -