REAR DOOR OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR OUTSIDE MOULDING LH

    Tech Tips

    When installing the rear door outside moulding LH, heat the rear door panel and rear door outside moulding LH using a heat light.

    Standard
    Item Temperature
    Rear Door Panel 40 to 60°C (104 to 140°F)
    rear door outside moulding LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel and rear door outside moulding LH excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01QU6IC01
      *a Double-sided Tape

      Install the rear door outside moulding LH.


      1. Using a heat light, heat the rear door outside moulding LH and the vehicle body surface.

      2. Remove the peeling paper from the face of the rear door upper outside moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 6 clips and double-sided tape to install the rear door outside moulding LH.

        Tech Tips

        Press the rear door outside moulding LH firmly to install it.