FRONT DOOR OUTSIDE MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD

   
   

   1. Clean the front door upper outside moulding pad installation surface with a non-residue solvent.

   2. Apply primer to the front door upper outside moulding pad installation area on the front door outside moulding.

      Note

      Apply primer evenly so that there are no uncoated areas.

   3. Remove the peeling paper on a new front door upper outside moulding pad while making sure not to touch the adhesional surface.

   4. 

      Install a new front door upper outside moulding pad in the position shown in the illustration.

      Note

      
      

      • Press the double-sided tape on the front door upper outside moulding pad firmly to attach.

      • After the primer dries (3 minutes or more), install the front door upper outside moulding pad.

      • After applying primer, reapply primer after 24 hours elapse.

2. INSTALL FRONT DOOR OUTSIDE MOULDING PAD

   Tech Tips

   When installing the front door outside moulding pad, heat the front door outside moulding using a heat light.

   Standard
   Item Temperature Front Door Outside Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the front door outside moulding excessively.

   
   

   1. Clean the front door outside moulding surface.

      
      

      1. Using a heat light, heat the front door outside moulding surface.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. 

      Install a new front door outside moulding pad.

      
      

      1. Using a heat light, heat the front door outside moulding.

      2. Remove the peeling paper from the face of the front door outside moulding pad.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the front door outside moulding pad as shown in the illustration.

         Tech Tips

         Press the front door outside moulding pad firmly to install it.

3. INSTALL FRONT DOOR REAR OUTSIDE MOULDING PAD

   Tech Tips

   When installing the front door rear outside moulding pad, heat the front door outside moulding using a heat light.

   Standard
   Item Temperature Front Door Outside Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the front door outside moulding excessively.

   
   

   1. Clean the front door outside moulding surface.

      
      

      1. Using a heat light, heat the front door outside moulding surface.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. 

      Install 6 new front door rear outside moulding pads.

      
      

      1. Using a heat light, heat the front door outside moulding.

      2. Remove the peeling paper from the face of the 6 front door rear outside moulding pads.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the 6 front door rear outside moulding pads as shown in the illustration.

         Tech Tips

         Press the front door rear outside moulding pad firmly to install it.

4. INSTALL NO. 2 OUTSIDE MOULDING SEAL

   Tech Tips

   When installing the No. 2 outside moulding seal, heat the front door outside moulding using a heat light.

   Standard
   Item Temperature Front Door Outside Moulding 20 to 30°C (68 to 86°F)

   Note

   Do not heat the front door outside moulding excessively.

   
   

   1. Clean the front door outside moulding surface.

      
      

      1. Using a heat light, heat the front door outside moulding surface.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   2. 

      Install 2 new No. 2 outside moulding seals.

      
      

      1. Using a heat light, heat the front door outside moulding.

      2. Remove the peeling paper from the face of the 2 No. 2 outside moulding seals.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the 2 No. 2 outside moulding seals as shown in the illustration.

         Tech Tips

         Press the No. 2 outside moulding seal firmly to install it.