REAR SPOILER REASSEMBLY

PROCEDURE


  1. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  2. INSTALL CENTER STOP LIGHT CORD ASSEMBLY

    Click here

  3. INSTALL NO. 1 REAR SPOILER PROTECTOR

    Tech Tips

    When installing the No. 1 rear spoiler protector, heat the rear spoiler using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear spoiler excessively.


    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B001JI8C01
      *a Mark-off Line
      *b Cutout
      *c Permitted Application Area

      Install a new No. 1 rear spoiler protector.


      1. Using a heat light, heat the rear spoiler.

      2. Remove the peeling paper from the face of the No. 1 rear spoiler protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the No. 1 rear spoiler protector with the mark-off line of the rear spoiler, and then install it.

        Tech Tips

        Press the No. 1 rear spoiler protector firmly to install it.