FRONT BUMPER REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE


  1. INSTALL FRONT BUMPER MOULDING


    1. Install the front bumper moulding with the 9 retainers.

  2. INSTALL FRONT BUMPER GUARD


    1. Install the front bumper guard with the 8 retainers.

  3. INSTALL LOWER RADIATOR GRILLE LH


    1. Attach the 4 claws to install the lower radiator grille LH.

    2. Install the 2 clips.

  4. INSTALL LOWER RADIATOR GRILLE RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL LOWER RADIATOR GRILLE LH (for Automatic Transaxle (U660F))


    1. Attach the 4 claws to install the lower radiator grille LH.

    2. Install the 2 clips.

  6. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. Attach the 18 claws to install the lower No. 1 radiator grille.

  7. INSTALL FRONT BUMPER EXTENSION LH


    1. Install the front bumper extension LH with the 5 retainers.

  8. INSTALL FRONT BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL FRONT BUMPER ARM HOLE COVER LH


    1. Attach the 2 claws to install the front bumper arm hole cover LH.

  10. INSTALL FRONT BUMPER ARM HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL FRONT BUMPER EMBLEM SUB-ASSEMBLY


    1. Attach the 2 claws to install the front bumper emblem sub-assembly.

  12. INSTALL RADIATOR GRILLE GARNISH SUB-ASSEMBLY LH


    1. Attach the 4 clips to install the radiator garnish sub-assembly LH.

    2. Detach the claw.

    3. Install the 2 screws.

  13. INSTALL RADIATOR GRILLE GARNISH SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. Install the front bumper hole cover LH with the 2 screws.

    2. Install the clip.

  15. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)


    1. Install the front bumper hole cover LH with the 2 screws.

    2. Install the clip.

  17. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  18. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  19. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  20. INSTALL HOOD TO FRONT END PANEL SEAL

    Tech Tips

    When installing the hood to front end panel seal, heat the front bumper cover using a heat light.

    Standard
    Item Temperature
    Front Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the front bumper cover excessively.


    1. Clean the front bumper cover surface.


      1. Using a heat light, heat the front bumper cover surface.

      2. Remove the double-sided tape from the front bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    2. When reusing the front bumper cover:


      1. Using a heat light, heat the front bumper cover surface.

      2. Remove the double-sided tape from the front bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. Install a new hood to front end panel seal.


      1. Using a heat light, heat the front bumper cover.

      2. Remove the peeling paper from the face of the hood to front end panel seal.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 9 clips to install the hood to front end panel seal.

        Tech Tips

        Press the hood to front end panel seal firmly to install it.

  21. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  22. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  23. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

    Click here

  24. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  25. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.