FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-crash Safety System)

    Click here

  2. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  4. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

    Click here

  5. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  6. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

    Click here

  8. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  9. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  11. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE NO. 3 ENGINE ROOM WIRE


    1. Detach each clamp and remove the No. 3 engine room wire.

      A01QRE1C01
      *A w/ Pre-crash Safety System *B w/ TOYOTA Parking Assist-sensor System

  13. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01QRP0C01
      *A w/o Fog Light
      *B w/ Fog Light

      Remove the clip.

    2. Detach the 5 claws and remove the front bumper hole cover LH.

  14. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE FRONT BUMPER EXTENSION MOULDING LH (w/ Fog Light)


    1. A01QRR3

      Detach the 3 claws and remove the front bumper extension moulding LH.

  16. REMOVE FRONT BUMPER EXTENSION MOULDING RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE FRONT BUMPER EXTENTION MOUNTING BRACKET


    1. A01QU41

      Remove the 2 screws and front bumper extension mounting bracket.

  18. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  19. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. Detach the 16 claws and 2 guides and remove the lower No. 1 radiator grille.

      A01QPUA

  20. REMOVE FRONT BUMPER EXTENSION LH


    1. A01QOA9

      Remove the 5 clips and front bumper extension LH.

  21. REMOVE FRONT BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE FRONT BUMPER ARM HOLE COVER LH


    1. A01QT0K

      Detach the 4 claws and guide and remove the front bumper arm hole cover LH.

  23. REMOVE FRONT BUMPER ARM HOLE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. REMOVE LOWER NO. 2 RADIATOR GRILLE


    1. Remove the 2 clips.

      A01QSYO

    2. Detach the 22 claws and remove the lower No. 2 radiator grille.

  25. REMOVE LOWER RADIATOR GRILLE LH


    1. for Automatic Transaxle (U660F):


      1. A01QOQB

        Remove the 2 screws.

      2. Detach the 2 claws and 2 guides and remove the duct.

      3. A01QOMW

        Remove the clip and open the lower radiator grille LH as shown in the illustration.

    2. A01QTJWC01
      *A for Automatic Transaxle (U660F)
      *B except Automatic Transaxle (U660F)

      Remove the 2 clips.

    3. Detach the 4 claws and remove the lower radiator grille LH.

  26. REMOVE FRONT BUMPER GUARD PAD LH


    1. A01QRS0C01
      *a Clip A
      *b Clip B

      Remove the clip labeled A.

    2. Remove the clip labeled B and front bumper guard pad LH.

  27. REMOVE FRONT BUMPER GUARD PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  28. REMOVE FRONT BUMPER GUARD


    1. Remove the 2 clips.

      A01QSQB
    2. A01QQ8Q

      Remove the front bumper guard as shown in the illustration.

  29. REMOVE FRONT BUMPER MOULDING


    1. Remove the 11 clips and front bumper moulding.

      A01QTT2