HORN INSPECTION

PROCEDURE

1. INSPECT LOW PITCHED HORN ASSEMBLY

   

   *1	Horn Body
   *a	Component without harness connected (Low Pitched Horn Assembly)

   
   

   1. Apply battery voltage and check operation of the low pitched horn according to the table below.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 1 Battery negative (-) → Hone body Low pitched horn sounds

      If the result is not as specified, replace the low pitched horn assembly.

2. INSPECT HIGH PITCHED HORN ASSEMBLY

   

   *1	Horn Body
   *a	Component without harness connected (High Pitched Horn Assembly)

   
   

   1. Apply battery voltage and check operation of the high pitched horn according to the table below.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 1 Battery negative (-) → Hone body High pitched horn sounds

      If the result is not as specified, replace the high pitched horn assembly.