HAZARD WARNING SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the driver side of RHD and LHD vehicles.

  • The procedures listed below are for the driver side of an LHD vehicle.

PROCEDURE


  1. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  2. REMOVE TELLTALE LIGHT ASSEMBLY (HAZARD WARNING SWITCH)

    A01QRR5

    1. Detach the 2 clips and claw.

    2. Disconnect the connector to remove the telltale light assembly (hazard warning switch).