LICENSE PLATE LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER


    1. A00YW6RC01
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and 4 guides to remove the No. 1 back door service hole cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

    A00YUGY

    1. Disconnect the connector.

    2. Detach the 2 claws to remove the license plate light assembly LH.