REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY LH


    1. Put protective tape around the rear light assembly LH.

    2. Install the rear light assembly LH with the 3 nuts and 2 cap nuts.

    3. Connect the 2 connectors.

      A00YXB6C01
      *1 Protective Tape *2 Nut
      *3 Cap Nut *4 Connector

  2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  6. INSTALL CENTER BACK DOOR GARNISH

    Click here