REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01PICVC03
      *a

      Component without harness connected

      (Rear Light assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U24-1 (B)

      Battery negative (-) → U24-2 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01PICVC04
      *a

      Component without harness connected

      (Rear Light assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U25-1 (B)

      Battery negative (-) → U25-2 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear light assembly RH.