REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A00YS7V

      Install the rear turn signal light bulb to the rear turn signal light bulb socket.

  2. INSTALL TAIL AND STOP LIGHT BULB


    1. A00YV2O

      Install the tail and stop light bulb to the tail and stop light bulb socket.

  3. INSTALL REAR COMBINATION LIGHT LENS AND BODY LH


    1. A00YUV1

      Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to install them as a unit.

    2. A00YUB0

      Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to install them as a unit.

    3. A00YV3OC01
      *1 Protective Tape

      Put protective tape around the rear combination light assembly LH.

    4. Move the rear combination light assembly LH in the direction of the arrow in the illustration and attach the 2 clips to install the rear combination light assembly LH.

    5. Install the 2 bolts.