REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  6. REMOVE REAR LIGHT ASSEMBLY LH


    1. A01PH7JC01
      A01PK3X Protective Tape

      Put protective tape around the rear light assembly LH.

    2. A01PKBX

      Disconnect the connector.

    3. A01PIF0

      Pull the rear light assembly LH towards the rear of the vehicle to remove it.

      Note

      If the rear light assembly LH is removed, replace the rear light gasket LH with a new one.