REAR FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR FOG LIGHT LED (for LH Side)


    1. A01PITUC01
      *a

      Component without harness connected

      (Rear Fog Light LED)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → S7-2

      Battery negative (-) → S7-1

      		 Illuminates

      If the result is not as specified, replace the rear fog light LED.

  2. INSPECT REAR FOG LIGHT LED (for RH Side)


    1. A01PITUC02
      *a

      Component without harness connected

      (Rear Fog Light LED)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → S8-2

      Battery negative (-) → S8-1

      		 Illuminates

      If the result is not as specified, replace the rear fog light LED.