HEADLIGHT ASSEMBLY(w/ Side Marker Light) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH

    A00YXF6C02
    *1 Protective Tape
    *2 Bolt
    *3 Screw

    1. Put protective tape around the headlight assembly LH.

    2. Connect each connector.

    3. Install the headlight assembly LH with the bolt and 3 screws.

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. ADJUST HEADLIGHT AIMING

    Click here

  4. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here