AUTOMATIC HIGH BEAM SYSTEM DATA LIST / ACTIVE TEST

DATA LIST

Note

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

Tech Tips

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: All ECUs / (desired system) / Data List.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Dimmer SW	Headlight dimmer switch high position signal	ON or OFF	ON: Headlight dimmer switch in high or high flash position OFF: Headlight dimmer switch not in high or high flash position	-
Auto Light SW	Headlight dimmer switch AUTO position signal	ON or OFF	ON: Headlight dimmer switch in AUTO position OFF: Headlight dimmer switch not in AUTO position	-
Head Light SW (Head)	Headlight dimmer switch head position signal	ON or OFF	ON: Headlight dimmer switch in head position OFF: Headlight dimmer switch not in head position	-
Illumination Rate Info	Illumination rate information	0 ms. to 2162.65 ms.	Value output according to ambient light levels	-
Auto H Beam STS0	Automatic high beam sensor current state	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS1	Automatic high beam sensor current state past 1	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS2	Automatic high beam sensor current state past 2	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS3	Automatic high beam sensor current state past 3	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS4	Automatic high beam sensor current state past 4	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS5	Automatic high beam sensor current state past 5	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS6	Automatic high beam sensor current state past 6	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode
Auto H Beam STS7	Automatic high beam sensor current state past 7	Undetec, CAM NA, No sens, Hlight, Taillgt, Speed, Daytime, Village, Malfunc, Delay	Current condition displayed	Undetec: undetected CAM NA: camera detection malfunction No sens: no detection Hlight: oncoming vehicles with headlights on Taillgt: preceding vehicles with taillights on Speed: vehicle speed Daytime: daytime state Village: urban area Malfunc: malfunction Delay: standby mode

Chassis > Lane Departure Alert > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Head Light (High Beam)	Status of headlight dimmer switch (high position)	ON or OFF	ON: Headlight dimmer switch in high position OFF: Headlight dimmer switch not in high position	-

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Head Light (High Beam)

Status of headlight dimmer switch (high position)

ON or OFF

ON: Headlight dimmer switch in high position

OFF: Headlight dimmer switch not in high position