AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Automatic High Beam Automatic high beam system ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.