AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM, Diagnostic DTC:B2452

DTC Code DTC Name
B2452 Height Control Sensor Data Out of Range When Initializing

DESCRIPTION

The headlight leveling ECU stores this DTC if the sensor value received from the rear height control sensor is out of range when performing initialization of the headlight leveling ECU; for example, the vehicle is not level or is being jacked up.

DTC No. Detection Item DTC Detection Condition Trouble Area
B2452 Height Control Sensor Data Out of Range When Initializing Value from rear height control sensor is out of the normal range when initializing.

  • Vehicle condition when initializing

  • Headlight leveling ECU assembly

CAUTION / NOTICE / HINT

Tech Tips

After replacing the headlight leveling ECU, initialization of the ECU is necessary.

Click here

PROCEDURE


  1. PERFORM HEADLIGHT LEVELING ECU INITIALIZATION


    1. Perform initialization of the headlight leveling ECU.

      Click here

      Tech Tips


      • Before initializing, make sure that the vehicle condition is proper for initialization.

      • Be sure to perform the initialization as instructed.

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Check for DTCs.

      Click here


      Body Electrical > HL AutoLeveling > Trouble Codes
      Result
      Proceed to
      DTC B2452 output does not occur
      DTC B2452 output occurs

      Tech Tips

      If the headlight leveling ECU sets B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight leveling ECU.


    DTC B2452 output does not occur

    END

    DTC B2452 output occurs

    REPLACE HEADLIGHT LEVELING ECU ASSEMBLY Click here