LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.


        Warning
        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Setting Lane change flasher system 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        Light Control
        Tester Display Description Default Setting ECU
        Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the headlight dimmer switch is in the AUTO position.*1 Normal 0:Normal,1:Long Main body ECU (Multiplex network body ECU)
        Disp Ex ON Sen Changes the level of ambient light at which the system dims lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*1, *3 Normal 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Disp Ex OFF Sen Changes the level of ambient light at which the system cancels the dimming of lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*1, *4 Normal 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Sensitivity Adjusts the ambient light sensitivity of the automatic light control system.*1, *5 Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main body ECU (Multiplex network body ECU)
        Follow Me Home Lighting Time Changes the low beam headlight lighting time when ignition switch is off and headlight dimmer switch is pulled to flash headlights once.*2 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main body ECU (Multiplex network body ECU)

        *1: w/ Automatic Light Control System

        *2: w/ Follow Me Home System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *3

        A01VA5NE04

        Tech Tips

        When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

        *4

        A01VA5NE04

        Tech Tips

        When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

        *5

        A01VA5NE06

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

    2. Customizing with Multi-display.


      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle Settings.

      3. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Light Sensor Sensitivity 0 (middle bar) Adjusts the ambient light sensitivity of the automatic light control system.*1, *2 -2, -1, 0, +1 or +2 Main body ECU (Multiplex network body ECU)

        *1: w/ Automatic Light Control System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *2

        A01VA5NE05
        *a System Setting
        *b Dark
        *c Light
        *d Setting

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.