RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER HEATER RELAY (w/ Washer Nozzle Heater)


    1. A01QSGAN05

      Remove the washser heater relay assembly.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the washser heater relay assembly.