RAIN SENSOR REMOVAL

PROCEDURE

1. REMOVE RAIN SENSOR COVER

   

   
   

   1. Slide the cover as shown in the illustration.

   2. 

      Detach the 2 claws and remove the rain sensor cover.

2. REMOVE RAIN SENSOR

   
   

   1. 

      Disconnect the connector.

   2. 

      *1

      Stopper

      Release the stopper by pulling it down.

   3. Remove the rain sensor as shown in the illustration.

3. CLEAN WINDSHIELD GLASS

   Note

   
   

   • The rain sensor tape can be reused; however, replace it with a new piece of tape if it is dirty or damaged.

   • Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.