WASHER LEVEL WARNING SWITCH INSPECTION

PROCEDURE


  1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

    A00YR9AC01
    *a

    Component without harness connected

    (Level Warning Switch Assembly)

    Tech Tips

    The following check should be performed with the level warning switch assembly installed to the windshield washer jar assembly.


    1. Fill the windshield washer jar assembly with washer fluid.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Fluid volume is more than 800 ml 10 kΩ or higher
      Fluid volume is less than 600 ml Below 1 Ω

      If the result is not as specified, replace the level warning switch assembly.