CHECK BASIC OPERATION
*: w/o Follow Me Home System
Conditions necessary for the power back door to open:
The power back door main switch is not pushed.
The back door is unlocked (except wireless one motion function).
The vehicle speed is 3 km/h (2 mph) or less (only when the ignition switch is ON).
The shift lever is in P, depressing the brake pedal or pulled up parking brake lever (this can be determined only when the ignition switch is ON).
Conditions necessary for the power back door to close:
The power back door main switch is not pushed.
The power back door sensor assembly circuit is not open.
Check the opening operation.
With the back door fully closed, push the back door control switch and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts opening.
With the back door fully closed, push the transmitter switch and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts opening.
Check the close operation.
With the back door fully open, push the back door control switch and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts closing.
With the back door fully open, push the transmitter switch and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts closing.
With the back door fully open, push the door control switch assembly and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts closing.
Check the wireless one motion operation.
With all doors locked, push the transmitter switch and check that the buzzer sounds for 0.8 seconds, the hazard warning lights flash twice* and the back door starts opening.
Check the operation when another input is detected during the opening or closing operation.
During a power back door opening operation, push the back door control switch, transmitter switch or door control switch assembly again, and check that the buzzer sounds for 0.2 seconds, the back door stops.
During a power back door closing operation, push the back door control switch, transmitter switch or door control switch assembly again, and check that the buzzer sounds for 0.2 seconds, the back door stops.
During a power back door opening or closing operation, push the back door opener switch assembly (opener switch), and check that the buzzer sounds for 0.2 seconds and the back door operation switches to manual operation mode.
CHECK JAM PROTECTION FUNCTION
Tech Tips
The power back door unit assembly set detects changes in the operating speed of the back door while the power back door is operating. If a change in the operating speed is out of the normal range, it will be judged that foreign objects are in the path of the power back door and the operation will will stop if the door is operating in the opening direction or move a certain amount in the reverse direction if the door is operating in the closing direction.
When the power back door sensor assemblies built into both sides of the back door are compressed, it is judged that foreign objects are in the path of the power back door and the operation will will reverse a little in the opposite direction and the stop.
The power back door sensor assemblies operate only while the back door is closing. They do not operate while the back door is opening.
Check the jam protection function (the back door sensor assembly) while the power back door is closing.
Note
Do not check this function using a part of your body such as your hand. Also, pay thorough attention that nothing gets caught by accident in this process.
Fully open the back door.
Press a switch to close the power back door.
While the back door is closing, press a power back door sensor assembly using the handle of a hammer or equivalent.
Check that the buzzer sounds twice for 0.1 seconds, the jam protection function is immediately activated and the power back door reverses a certain amount and stops.
Check the jam protection function (the pulse sensor in the power back door unit assembly set) while the power back door is closing.
Note
Do not check this function using a part of your body such as your hand. Also, pay thorough attention that nothing gets caught by accident in this process.
Fully open the back door.
Press a switch to close the power back door.
While the back door is closing, insert a tire or equivalent between the door panel and vehicle body, in order to interrupt the closing operation.
Check that the buzzer sounds twice for 0.1 seconds, the jam protection function is immediately activated and the power back door reverses a certain amount and stops.
Check the jam protection function while the power back door is opening.
Note
Pay thorough attention that your body or your clothes, etc. do not get caught in the door by accident in this process.
Fully close the back door.
Press a switch to open the power back door.
While the back door is opening, use your hands to press on the outside surface of the back door panel so that the operating speed decreases.
Check that the buzzer sounds twice for 0.1 seconds and the jam protection function is immediately activated and the power back door stops.
CHECK ASSIST OPERATION
Check that the door automatically starts to fully close when the door is manually moved in the closing direction with the back door at a rest.
CHECK AUTOMATIC OPENING OPERATION STOPPED POSITION MEMORIZATION FUNCTION
When the back door is at a rest, press and hold the door control switch assembly to memorize the automatic opening operation stopped position.
Start the automatic opening operation using each switch and check that the door stops at the memorized position.