POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) Remote Up / Down Function does not Operate

DESCRIPTION

When the ignition switch is ON, the power window regulator master switch assembly sends remote up and down signals to the power window regulator switch assembly, rear power window regulator switch assembly LH or rear power window regulator switch assembly RH. Then, the power window regulator switch assembly, rear power window regulator switch assembly LH or rear power window regulator switch assembly RH drives each door window regulator motor assembly.

WIRING DIAGRAM

Refer to System Diagram.

Click here

PROCEDURE

1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH)

   
   

   1. Push the window lock switch off and operate the switches on the power window regulator master switch assembly. Check that the remote UP/DOWN function operates normally.

      Click here

      Result
      Proceed to Remote UP/DOWN function operates normally Remote UP/DOWN function does not operate normally

   
   

   Remote UP/DOWN function operates normally

   END

   Remote UP/DOWN function does not operate normally

2. CHECK MANUAL UP/DOWN FUNCTION

   
   

   1. Check that each power window manual UP/DOWN function operates normally.

      Click here

      Result
      Proceed to Manual UP/DOWN function operates normally Manual UP/DOWN function does not operate normally

   
   

   Manual UP/DOWN function operates normally

   REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Click here

   Manual UP/DOWN function does not operate normally

   GO TO OTHER PROBLEM Click here