POWER WINDOW CONTROL SYSTEM(w/ Jam Protection Function) Jam Protection Function does not Operate

DESCRIPTION

The jam protection function operates within a specified range during the manual up or auto up operation.

CAUTION / NOTICE / HINT

Note

If the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) has been replaced with a new one, initialize the power window control system.

Click here

PROCEDURE


  1. PERFORM INITIALIZATION


    1. Initialize the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP/DOWN FUNCTION)


    1. Check if the power window auto up and down function operates normally.

      Click here

      Result
      Proceed to
      Driver door auto up and down function is normal
      Driver door auto up and down function is not normal

    Driver door auto up and down function is not normal

    GO TO OTHER PROBLEM Click here

    Driver door auto up and down function is normal

  3. CHECK JAM PROTECTION FUNCTION OPERATING RANGE


    1. Check if the jam protection function operates normally for the driver door power window.

      Tech Tips

      The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

      Result
      Proceed to
      Jam protection function operates normally
      Jam protection function does not operate normally (for LHD)
      Jam protection function does not operate normally (for RHD)

    Jam protection function operates normally

    END (PROBLEM DUE TO INITIALIZATION FAILURE)

    Jam protection function does not operate normally (for LHD)

    REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Click here

    Jam protection function does not operate normally (for RHD)

    REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Click here