POWER WINDOW CONTROL SYSTEM(w/ Jam Protection Function), Diagnostic DTC:B2313

DTC Code DTC Name
B2313 Glass Position Initialization Incomplete

DESCRIPTION

The front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) is operated by the power window regulator master switch assembly. The front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) has motor and ECU functions.

When the ECU determines that the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) has not been initialized, DTC B2313 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
B2313 Glass Position Initialization Incomplete

Either condition is met:


  • Front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) not initialized

  • Front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) is malfunctioning

  • Battery disconnected when ignition switch is ON

  • Front power window regulator motor assembly LH (for LHD) not initialized

  • Front power window regulator motor assembly RH (for RHD) not initialized

  • Front power window regulator motor assembly LH (for LHD)

  • Front power window regulator motor assembly RH (for RHD)

CAUTION / NOTICE / HINT

Note


  • DTC B2313 is stored in the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD).

  • If the battery is disconnected while the ignition switch is ON, DTC B2313 is stored.

  • If the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD) has been replaced with a new one, initialize the power window control system.

    Click here

PROCEDURE


  1. PERFORM INITIALIZATION


    1. Initialize the front power window regulator motor assembly LH (for LHD) or front power window regulator motor assembly RH (for RHD).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Turn the ignition switch off.

    2. Wait for at least 10 seconds, and then turn the ignition switch to ON.

    3. Check for DTCs.

      Click here


      Body Electrical > D-Door Motor > Trouble Codes
      Result
      Proceed to
      DTC B2313 is not output
      DTC B2313 is output (for LHD)
      DTC B2313 is output (for RHD)

    DTC B2313 is not output

    END (PROBLEM DUE TO INITIALIZATION FAILURE)

    DTC B2313 is output (for LHD)

    REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH Click here

    DTC B2313 is output (for RHD)

    REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH Click here