POWER WINDOW CONTROL SYSTEM(w/ Jam Protection Function) UTILITY


  1. CLEAR WINDOW POSITION DATA (Using Techstream)

    Note

    If "Reset Memory" is performed, DTC B2313 will be output.


    1. Turn the engine switch off.

    2. Connect the Techstream to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the Techstream on.

    5. Enter the following menus: Body Electrical / (desired system) / Utility / Reset Memory.

    6. Select the "Reset Memory" to clear the window position data using the Techstream.


      Body Electrical > D-Door Motor > Utility
      Tester Display
      Reset Memory