FRONT CONSOLE BOX DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (except Slide Console Type)


    1. A01V8NZ

      If a C-ring is attached, removal the C-ring.

      Tech Tips

      When installing, reinstallation is not required.

    2. A01V8F0C01
      *1 Shaft
      *a Plastic-faced Hammer

      Using a plastic-faced hammer, tap the shaft in lightly and then pull it out from the rear console box sub-assembly.

    3. A01VAVJ

      Remove the 2 bushes and console compartment door sub-assembly.

  2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Slide Console Type)


    1. A01VAG1

      Remove the 4 screws and console compartment door sub-assembly.

  3. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY


    1. A01V796

      Remove the 2 screws and console compartment door lock sub-assembly from the console compartment door sub-assembly.

  4. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)


    1. A01V6QM

      Detach the 4 hooks and remove the shifting hole cover sub-assembly from the upper console panel sub-assembly.