FRONT CONSOLE BOX DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY


    1. A00YTDM

      Detach the 4 claws and 2 clips and remove the console rear end panel sub-assembly.

  2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (except Slide Console Type)

    A00YQZLC01
    *1 Plastic-faced Hammer
    *2 Shaft

    1. Using a plastic-faced hammer, tap the shaft in lightly and then pull it out from the rear console box sub-assembly.

    2. A00YXI0

      Remove the 2 bushes and console compartment door sub-assembly.

  3. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Slide Console Type)


    1. A00YTZ3

      Remove the 4 screws and console compartment door sub-assembly.

  4. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY


    1. A00YUI5

      Remove the 2 screws and console compartment door lock sub-assembly from the console compartment door sub-assembly.

  5. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)


    1. A00YSUC

      Detach the 4 hooks and remove the shifting hole cover sub-assembly from the upper console panel sub-assembly.