LOWER INSTRUMENT PANEL DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY


    1. A01QOGT

      Detach the clip and remove the glove compartment door stopper sub-assembly.

  2. REMOVE NO. 2 SWITCH HOLE BASE


    1. A01QPUX

      Detach the 3 clips and claw and remove the No. 2 switch hole base.

  3. REMOVE SPARE SWITCH HOLE COVER


    1. A01QPJQ

      except 4WD/AWD:

      Detach the 2 claws and remove the spare switch hole cover.

    2. A01QPIC

      w/o Power Back Door:

      Detach the 2 claws and remove the spare switch hole cover.

    3. A01QQ5N

      w/o Downhill Assist Control:

      Detach the 2 claws and remove the spare switch hole cover.

    4. A01QSX4

      Detach the 2 claws and remove the spare switch hole cover.

  4. REMOVE DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)

    Click here

  5. REMOVE DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)

    for LHD:

    Click here

    for RHD:

    Click here

  6. REMOVE DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)

    Click here

  7. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)

    Click here

  8. REMOVE PUSH START SWITCH (for RHD with Entry and Start System)

    Click here

  9. REMOVE ANTENNA CORD SUB-ASSEMBLY

    for LHD:

    Click here

    for RHD:

    Click here