HEATER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL WATER HOSE AND FUEL HOSE


    1. A01V6VGC01
      *a 45°
      *b 90°

      for AD Series Engine:


      1. Connect the 2 water hoses and fuel hose to the heater assembly and engage the 3 clips as shown in the illustration.

    2. A01V82AC01
      *a 90°

      for 2WW:


      1. Connect the 2 water hoses and fuel hose to the heater assembly and engage the 3 clips as shown in the illustration.

  2. INSTALL NO. 1 EXHAUST PIPE SUB-ASSEMBLY


    1. Install the 2 new gaskets to the heater assembly.

    2. Install the No. 1 exhaust pipe sub-assembly to the heater assembly with the 2 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  3. INSTALL HEATER AND ACCESSORY ASSEMBLY


    1. A01V6XSC02
      *a Marking

      for AD Series Engine:


      1. Install the heater and accessory assembly with the 2 bolts and nut.

        Torque:
        9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      2. Connect the No. 1 exhaust pipe sub-assembly to the body with the nut.

        Torque:
        9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      3. Connect each hose and engage the 3 clips as shown in the illustration.

    2. A01VB1GC01
      *a Marking

      for 2WW:


      1. Install the heater and accessory assembly with the 2 bolts and nut.

        Torque:
        9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      2. Connect the No. 1 exhaust pipe sub-assembly to the body with the nut.

        Torque:
        9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      3. Connect each hose and engage the 3 clips as shown in the illustration.

    3. Connect the connector to the heater and accessory assembly.

  4. INSTALL NO. 2 EXHAUST PIPE SUB-ASSEMBLY


    1. Install a new gasket to the No. 2 exhaust pipe sub-assembly.

    2. Temporarily install the No. 2 exhaust pipe sub-assembly with the 2 nuts and bolt.

    3. Tighten the 2 nuts and then tighten the bolt.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  5. INSTALL NO. 3 COWL TOP PANEL INSULATOR (for 2WW)

    Click here

  6. INSTALL NO. 1 ENGINE COVER (for 2WW)

    Click here