HEATER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL WATER HOSE AND FUEL HOSE

    A00YVDJC01
    *a 45°
    *b 90°

    1. Connect the 2 water hoses and fuel hose to the heater assembly and engage the 3 clips as shown in the illustration.

  2. INSTALL NO. 1 EXHAUST PIPE SUB-ASSEMBLY


    1. Install the 2 new gaskets to the heater assembly.

    2. Install the No. 1 exhaust pipe sub-assembly to the heater assembly with the 2 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  3. INSTALL HEATER AND ACCESSORY ASSEMBLY


    1. A00YX2LC01
      *1 Marking

      Install the heater and accessory assembly with the 2 bolts and nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    2. Connect the No. 1 exhaust pipe sub-assembly to the body with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect each hose and engage the 3 clips as shown in the illustration.

    4. Connect the connector to the heater and accessory assembly.

  4. INSTALL EXHAUST PIPE SUB-ASSEMBLY


    1. Install a new gasket to the No. 2 exhaust pipe sub-assembly.

    2. Temporarily install the No. 2 exhaust pipe sub-assembly with the 2 nuts and bolt.

    3. Tighten the 2 nuts and then tighten the bolt.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }