CONDENSER(for 1AD-FTV, 2AD-FHV, 2AD-FTV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT

    for Halogen Headlight: Click here

    for LED Headlight: Click here

  3. REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  4. REMOVE RADIATOR UPPER AIR GUIDE PLATE

    Click here

  5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01VA4M

      Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. DISCONNECT LIQUID PIPE SUB-ASSEMBLY


    1. A01V8QO

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

    2. Remove the O-ring from the liquid pipe sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE NO. 1 RADIATOR SUPPORT

    A01V7CB

    1. Remove the 2 bolts and 2 No. 1 radiator supports.

  8. REMOVE UPPER RADIATOR SUPPORT

    A01VA8C

    1. Remove the 4 bolts and 2 upper radiator supports.

  9. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01V9IV

      Detach the 2 guides and remove the cooler condenser assembly as shown in the illustration.

      Note

      Do not damage the condenser or radiator when removing the cooler condenser assembly.