CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT

    for Halogen Headlight: Click here

    for HID Headlight: Click here

  3. REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  4. REMOVE RADIATOR UPPER AIR GUIDE PLATE

    Click here

  5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01GBCL

      Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. DISCONNECT LIQUID PIPE SUB-ASSEMBLY


    1. A01GAYC

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

    2. Remove the O-ring from the liquid pipe sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE NO. 1 RADIATOR SUPPORT

    Click here

  8. REMOVE NO. 2 FAN SHROUD


    1. Detach the 3 clamps and disconnect the water by-pass pipe from the No. 2 fan shroud.

    2. A01GAZ4

      Remove the 2 bolts and No. 2 fan shroud.

  9. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01GCN5

      Detach the 2 guides and remove the cooler condenser assembly as shown in the illustration.

      Note

      Do not damage the cooler condenser or radiator when removing the cooler condenser assembly.