REAR WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A00YVVYC01
      *1 Ceramic Edge

      Operate the rear wiper motor assembly.

    2. Stop the rear wiper motor assembly operation.

    3. Check the automatic stop (park) position.

      Tech Tips

      After the rear wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      OK
      The rear wiper stops at the position shown in the illustration.
      Standard
      Area Standard Condition
      a 15 mm (0.5906 in.)