COMPRESSOR(for 2WW) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE RADIATOR ASSEMBLY

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01QP9I

      Remove the bolt and disconnect the suction hose sub-assembly.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01QT9I

      Remove the bolt and disconnect the discharge hose sub-assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01QQ4T

      Disconnect the connector.

    2. Detach the clamp and disconnect the wire harness.

    3. Remove the bolt and 2 nuts.

    4. A01QODJ

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.

    5. Remove the compressor pin.

      Note

      It is not necessary to remove a compressor pin unless it being replaced.