COMPRESSOR(for 2AR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01V7RC

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01VAM2

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01VAP2

      w/ Pulley:

      Disconnect the connector.

    2. w/ Pulley:

      Remove the bolt and disconnect the wire harness bracket.

    3. A01V9QV

      w/ Magnet Clutch:

      Detach the 2 harness clamps and disconnect the 2 connectors.

    4. A01V9IU

      Remove the 2 bolts and 2 nuts.

    5. Using an E8 ''TORX'' socket wrench, remove the 2 stud bolts and compressor assembly with pulley.